Scantech DC-100 Programming Manual Download Page 33

Page: 33 / 86

not be able to read or transmit the code.

Read “Minimum Length” to set the minimum length of code.

Read “Maximum Length” to set maximum length of code.

Code 128 Maximum Length Code 128 Minimum Length

The maximum length value of any type of 1D code is not more than 255. If the

maximum length is shorter than the minimum length, the scanner can only read this

two length of code; if the maximum length is equal to minimum length, the scanner can

only read the code of this length.

This length is the length of the code itself, not including prefix/suffix, tailed suffix,

AIM-ID,CODEID.

UCC/EAN-128

Return to Default

After read this setting, the parameters of UCC/EAN-128 will be returned to

factory default.

Return UCC/EAN-128 to default

Enable / Disable UCC/EAN-128

Enable UCC/EAN-128 Enable as Code 128

Disable UCC/EAN-128

Summary of Contents for DC-100























































































Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands

Scantech DC-100, Programming Manual

Search results

Summary of Contents for DC-100

Reviews:

Related manuals for DC-100

Brands by name

Popular brands