54
Code ID
Read “Enable CodeID
”
to start the setting, then scan the corresponding 16 HEX
Value of CodeID character and save.
Codabar - Enable CODEID
Set the CodeID of Codabar as
“
p
”（
16 HEX Value is 0x70
）：
1. Read above “Enable CodeID”
2. Read number
“
7
”
，
“
0
”
(See Appendix- Data Code)
3. Read “Save”
Check
Codabar not limit to include the check digit, if there is check digit, the last
character will be. Check digit is the counted value according to all the data, which used
to check the correctness of the data.
If check digit is “None”, the scanner will transfer the code data normally.
If “check and no transmit check digit”, the scanner will take the last character as
check digit. If check success , the scanner will transmit the normal data except for the
check digit, if check fail, the scanner will not read the code.
If “check and transmit the check character”, the scanner will the last character as
check digit. If check success, the scanner will transmit the code and the check digit as
the last character together, if check fail, the scanner will not read the code.
None Check and No Transmit Check Digit
Check and Transmit Check Digit
