95
ECE type approval
The AUS4
67$1'$5'
unit was reviewed by the directive UN/ECE R10 and registered and
type approved by the SNCH authority in Luxembourg. This is shown by type approval
number as follows.
10R - 05 13782
Radio Equipment Directive
–
Declaration of Conformity
Hereby, Harman Becker Automotive Systems GmbH declares that the radio
equipment type
AUS4 Standard
is in compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the following internet
Address: (*1)
Bluetooth: 2400-2483,5 MHz <10 dBm
WLAN: 2400-2483,5 MHz <20 dBm
(*1)
http://www.harman.com/compliance
Manufacturer:
Harman Becker Automotive Systems GmbH
Becker-Goering-Strasse 16
76307 Karlsbad,
Germany
86$&$1$'$
)&&,'7*$8667'
7KLVGHYLFHFRPSOLHVZLWK3DUWRIWKH)&&5XOHV2SHUDWLRQLVVXEMHFWWRWKHIROORZLQJWZR
FRQGLWLRQV
WKLVGHYLFHPD\QRWFDXVHKDUPIXOLQWHUIHUHQFHDQG
WKLVGHYLFHPXVWDFFHSWDQ\LQWHUIHUHQFHUHFHLYHGLQFOXGLQJLQWHUIHUHQFHWKDWPD\FDXVH
XQGHVLUHGRSHUDWLRQ
&KDQJHVRUPRGLILFDWLRQVQRWH[SUHVVO\DSSURYHGE\WKHSDUW\UHVSRQVLEOHIRUFRPSOLDQFHFRXOG
YRLGWKHXVHUVDXWKRULW\WRRSHUDWHWKHHTXLSPHQW
This device has been designed and complies with the safety requirements for portable (<20cm)
RF exposure in accordance with FCC rule part 2.1093 and KDB 447498 D01 as demonstrated in
the RF exposure analysis. Installers must ensure that this device must not be co-located or
operated in conjunction with any other antenna or transmitter except in accordance with FCC
multi-transmit-ter product procedures.
CERTIFICATION INFORMATION
EC-Declaration of Conformity
Harman Becker Automotive Systems GmbH hereby declares that this unit,
AUS4
67$1'$5'
, is in compliance with the essential requirements and other
relevant
provisions of Directive
(8
