27
Manual tuning
Using the right rotary encoder/push button
:
·
Rotate the rotary encoder/push button
in the RADIO menu; clockwise or
anti-clockwise to change the receiving frequency.
Using the frequency display:
·
Tap on the
icon.
>
A frequency scale is displayed.
Perform one of the following steps to set the desired station manually.
·
Tap the frequency scale.
·
Tap on
or
.
·
Press and hold the or button.
·
Rotate the right rotary encoder/push button
clockwise or counter-clockwise.
STORE RADIO STATIONS
Radio stations can be stored on each band (AM, FM and DAB) using the station
buttons.
·
Select the desired band.
·
Select the desired station.
·
Press and hold one of the station buttons until you hear a beep.
>
Pressing the corresponding station button retrieves the station from the station
memory.
Note
If you do not hear a beep when saving the radio station, it may be that the
system sounds have been deactivated. To activate system sounds, see the
"Introduction" chapter, sub-chapter "Customise settings".
RETRIEVING RADIO STATIONS
·
Select the desired band.
·
Press a station button.
>
The corresponding radio station is played.
