Sauter flexotron®800
ventilation
Access rights
P100012082
59
8.3
Change password
As default flexotron®800 comes with the following passwords for the different levels:
Admin
1111
Service
2222
Operator
3333
Normal
5555
You can only change the password for log on levels lower or equal to the presently
active level, i.e. if you are logged in as Admin you can change all passwords, but as
Operator you can only change the Operator and Normal passwords. There is no point
in changing the Basic password since access to that level is granted automatically to all
users.
Change password for
level:Operator
New password: ****
Do not set the password for Admin to the same value as the password for a lower
level since this will prevent access to the Admin level.
Forgotten your password? If the password for Admin has been changed and then lost,
a temporary password can be obtained from SAUTER. This code is date dependent
and only valid for one day.
8.4
Change password to remove automatic logoff
If you want to remove the automatic logoff, change the password of the desired level to
0000. After changing the password, the level will always be activated.
This should be done with consideration, since no alarm is continuously given that a
certain level has been activated. However, it is very useful in certain cases, if the unit
is intended to be used by educated personnel or for instance at commissioning.
