
SATEL GSM-4/GSM-5
53
8.1.1 Reporting the module status (GPRS)
1. Configure the parameters of monitoring station(s) (see: p. 41):
enter the monitoring station address;
enter the number of TCP port on which communication with the monitoring station will
take place;
enter the encryption key for data sent to the monitoring station;
enter the system identifier;
enter the GPRS key.
2. Define the rules for reporting the module related events (see: p. 44).
8.1.2 Reporting events from the control panel (GPRS)
Control panel connected only to the telephone line output
1. Program the parameters as described in section "Reporting the module status (GPRS)",
it. 1.
2. Enter the telephone number which will also be programmed in the control panel for the
monitoring station simulated by the module (see: "MS1 tel.number / MS2 tel.number"
p. 43).
3. Define duration of the kiss-off tone generated by the module (see: "Kissoff period" p. 41).
4. Enable the "GSM main line" option (see: p. 28).
Control panel connected to RS-232 port
Parameters related to the monitoring stations will be automatically downloaded from the
control panel.
You can enable monitoring of the connection with INTEGRA control panel (see:
"Tst.con.INTEGRA" p. 41).
8.2 Starting the CSD reporting
Enable the "Monitoring" option.
Select CSD as the reporting link (see: " Links to MS1 / Links to MS2" p. 42).
Enable the event buffering, if the events are to be written to the event log and the module
is to acknowledge receipt of events from the control panel before forwarding them to the
monitoring station (see: "Events buffer" p. 41).
If the events buffering option is enabled and the module is to provide information about
problems with transmission, enter the content of SMS message (see: "SMS monit.trbl."
p 43) and telephone number (see: "Mon.trbl.tel.nr" p. 43) to which the information will be
sent.
8.2.1 Reporting the module status (CSD)
1. Configure the parameters of monitoring station(s) (see: p. 41):
enter the system identifier;
enter the telephone number for CSD reporting.
2. Define the rules for reporting the module related events (see: p. 44).
8.2.2 Reporting events from the control panel (CSD)
Control panel connected only to the telephone line output
1. Program the telephone number for CSD reporting (see: p. 43).