
GSM-4/GSM-5
SATEL
24
7. Click on the
button. The module data will be read out. Establishing communication
will be indicated in the program window by a suitable message.
8. Program suitable parameters for the module.
9. Click on the
button to write the entered data to the module.
10. The programmed data can be saved as a file to the computer disk.
When the programming is completed, disconnect the cable connecting the module to
the computer.
6.2.2 Remote programming
During remote programming, the module will not execute any other functions
requiring the use of GSM telephone.
The remote programming is available after the following items have been programmed:
in the "SIM 1/2" tab:
PIN code of the SIM card (if PIN code is required by the card);
access point name (APN) for the Internet GPRS connection ("GPRS APN" field);
DNS server IP address ("DNS server" field) to be used by the module (you do not
need to program the DNS server address, if the computer address will be entered as
an IP address, not a name);
user name for the Internet GPRS connection ("Username" field);
password for the Internet GPRS connection ("Password" field);
in the "TCP/IP downloading" tab:
the control command that initiate connection with the computer ("Initiating SMS" field);
address of the computer from which the module is to be remotely programmed
("Server address" field);
whether the module can connect to the computer whose address will be given in the
SMS message ("Server from SMS" option);
number of the port through which communication between computer and module is to
be effected;
D
LOAD
10
key.
The computer running the D
LOAD
10
program must have the so-called public address (that
can be seen directly in the Internet by everybody).
In order to establish communication between the module and the computer do the following:
1. Start the D
LOAD
10 program.
2. Select the "TCP/IP" in the "Communication" menu. A window will open in which
information on server activation will be displayed (see: Fig. 13).
3. Send to the GSM module telephone number an SMS message containing the control
command used to start communication with the D
LOAD
10 program ("Module download"
submenu, "SMS prog.module" function).
The module will connect to the computer whose
address is programmed in the module.
If the "Any address" ("Module download" submenu) option is enabled in the module,
you can send a message with the xxxxxx=aaaa:p. or xxxxxx=aaaa:p= content,
where "xxxxxx" is the control command used to initiate communication with the
D
LOAD
10
program ("Module download" submenu, "SMS prog.module" function), "aaaa"
is the address of computer with which communication is to be established by the
module, shown as an IP address or as a name, and "p" is the number of network port
through which communication with the D
LOAD
10
program is to take place. The module