
SATEL GSM-4/GSM-5
21
Attempts/link
Mon.trbl.tel.nr
SMS monit.trbl.
IN1 viol. code
IN2 viol. code
IN3 viol. code
IN4 viol. code
IN1 rest. code
IN2 rest. code
IN3 rest. code
IN4 rest. code
TL trouble code
TL restore code
Test trans.code
Autorestart
Fax/Modem
Modem format
GSM ident.
Beep after SMS
RS baud rate
BTS test
Erase settings
6.1.2 Description of functions available only in service mode
[End of service]
– completion of service mode.
[BTS test]
– after starting the function, the following information related to GSM network will
appear on the display of module with built-in GSM u-blox LEON-G100 telephone:
MCC, MNC, LAC, CI
where:
MCC – Mobile Country Code;
MNC – Mobile Network Code;
LAC – Location Area Code;
CI – Cell Identity.
6.1.3 Entering data by means of buttons
The entered data are presented on the display. The way of programming depends on the
type of data entered by means of the service function. See also section "Buttons" p. 12.
Programming the options
At the end of line, on the right-hand side, there is a symbol indicating whether the option is
enabled – , or not – . Pressing the NEXT or CHANGE button will change the currently
displayed symbol to the other one.
Entering characters
In functions in which alphanumeric characters are to be entered, there is a flashing cursor
displayed, indicating the field that can be edited. The NEXT button is used to move the cursor
one position to the right or to move it back to the first position on the left side of the data
being entered. The CHANGE button allows you to change the displayed character. Press the
button repeatedly until the required character appears.