PR 5610 Installation Manual
Commissioning
Sartorius
93
Setting the interface parameters [Serial port setup]
Selection of the built-in interface [Builtin RS232], [Slot 1…3
RS485] or [Slot 1…3 RS232] with
or
; confirm [Protocol]
with
.
Protocols available are:
XON/XOFF software
handshake
3964R-slv
Siemens S5 Dust slave
3964R-mas
Siemens S5 Dust master
3964RS5sl
Siemens S5 Dust slave with header
3964RS5ms
Siemens S5 Dust master with header
EW-COM V1
EW-protocol V1 (standard)*
EW-COM V2
EW-protocol V2 (multiprogram PR 1740)*
EW-COM V3
EW-protocol V3 (DDE server)*
RTS/CTS
hardware handshake
JBUS/ModB
JBUS / Modbus protocol*
RemoteDsp
Remote display string*
W
&
M Print
W
&
M printer string*
Modem
Modem control
xBPI
Additional
scale*
* The protocol can be selected only once per instrument. A second selection is not possible, if the protocol has
already been assigned.
Protocol parameters
Select the protocol parameters with
or
; confirm with
.
Select baud rate [300, 600, 1200, 2400, 4800, 9600, 19k2, 38k4
and 115k2] with
or
; confirm with
.
Select bits [7] or [8] with
or
; confirm with
.
Select parity [None], [Odd] or [Even] with
or
; confirm
with
.
Select stop bits [1] or [2] with
or
; confirm with
.
Select device type [Ansi], [VT52] or [Raw] with
or
;
confirm with
. Ansi and VT52 for VDUs, Raw for printer,
remote display and communication.
Select echo mode [Enabled] or [Disabled] with
or
;
confirm with
.
Enter slave address (only for EW protocol A-Z or JBUS/ModBus
protocol 1-127) with
or
; confirm with
.
After change of at least one parameter safety check. With [YES]
storage of changed data, with [NO] data remain unchanged.
Automatic return to the setup menu for serial interfaces.
