manualshive.com logo in svg

Sartorius PR 5610, Installation Manual

Share
Download
Sartorius PR 5610 Installation Manual Download Page 120

PR 5610 Installation Manual 

       

 Commissioning with Terminal  

Sartorius 

                                                                                      117 

 

5.2.7  Entry of user-defined units 

 

PR1713 Rel. 03.12 20.05.2004 09:05 

     Configuration                         Mo 05.July 2004 13:06:16 

 

  

U

 Set units 

 

  

F

 Set fieldbus configuration 

  

E

 Exit 

 

Enter new units : u1u2u3u4u5u6u7u8

 

 

For use of IEC 61131 firmware functions MAKE_WEIGHT and SET_WEIGHT_UNIT, 8 different units can be 
defined. Each unit is composed of 2 characters. 

• 

Press key [U] 

• 

A string (16 characters) of the 8 actual units á 2 characters is displayed:  

Enter new units: u1u2u3u4u5u6u7u8

 

The cursor is behind the 16

th

 character. 

• 

Move cursor with arrow keys, delete characters with the backspace key. (line editor). 

• 

Entry of required characters (units).  

• 

Press the Enter key. If the entry is correct, the line is removed from the display. If the entry is faulty, 
the following message 

(must be 16 characters): lbcmdm 

and the characters entered so far are 

displayed. 

 

 

 

5.2.8  Printing all configuration data 

 

All parameters are printed out via the serial port configured for the printer device.  

 

Summary of Contents for PR 5610






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands