manualshive.com logo in svg

Sartorius PR 5610, Installation Manual

Share
Download
Sartorius PR 5610 Installation Manual Download Page 20

PR 5610 Installation Manual 

       

 Function Description  

Sartorius 

                                                                                         17 

 

2.4.3 Operating 

concept 

 
 

2.4.3.1    Operating via softkeys 

 

The operation is menu-guided. For this purpose, the instrument has a 'softkey’-functionality: 
Three 'softkeys' below the display marked by an upward-direction arrow 

 correspond to the function 

described in the lower text display line.  

 
If more than three functions can be selected, double arrows   indicate that further items can be displayed with 

the more key 

 . 

 

 

 

 

 

 
 
A menu can be left with 

 , the operation is continued at the next higher level. 

 
 
 

2.4.3.2    Selection via scroll keys 

 
 

 

 

 

 
 
The functions in the menu can be scrolled in forward direction using the scroll down key   or in reverse 
direction using the scroll up key 

 . 

 
The exit key 

 is used to leave the menu item and to continue at the next higher level. 

 
 

Summary of Contents for PR 5610






































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands