These operations may be performed with the Web browser installed on your PC. For details, refer to the linked
information.
Operation
Associated button and use
Equivalent network operation screen
Restoring factory default
settings
Press the NEAR button (
1
) and the SET
button (
3
) simultaneously
OPTION SETTINGS (FACTORY
DEFAULT)
Resetting login password (for
default users only)
Press the FAR button (
2
) and the SET
button (
3
) simultaneously
Not supported via network operation
Adjusting focus
For details, refer to the “Lens Adjustment”
section.
CAMERA SETTINGS (FOCUS
ASSIST/IRIS SETTINGS)
Adjusting iris
Inverting video of wall-mounted
camera
Press the REVERSE button (
4
)
Not supported via network operation
For details, see the “Installation
Manual”.
Restarting camera
Press the RESET button (
5
)
OPTION SETTINGS (CAMERA
REBOOT)
Viewing Firmware Version
For details, refer to the “Viewing Firmware
Version” section.
OPTION SETTINGS (FIRMWARE
UPDATE)
Be sure to stop recording once before attempting to restart the camera or restoring the factory default
settings. Performing these operations during recording prevents correct video recording.
For the detailed procedures for connecting terminals and cables, refer to the “Connections” section.
Use these coupling holes to mount the camera to the separately-sold base bracket.
Use this socket to connect the camera to your PC to enable network operation.
Introduction 7/16
