Sanyo RL-4930, User Manual

Page: 284 / 297

276 Section 4A: Safety
Specific Absorption Rates (SAR) for Wireless Phones
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring
and calculation process. It does not represent how much RF the phone
emits. All phone models are tested at their highest value in strict laboratory
settings. But when in operation, the SAR of a phone can be substantially
less than the level reported to the FCC. This is because of a variety of factors
including its proximity to a base station antenna, phone design and other
factors. What is important to remember is that each phone meets strict
federal guidelines. Variations in SARs do not represent a variation in safety.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe for
use by the public.
The highest reported SAR values of the RL-4930 are:
AMPS mode (Part 22):
Head: 1.01 W/kg; Body-worn: 0.516 W/kg
PCS mode (Part 24):
Head: 0.374 W/kg; Body-worn: 1.15 W/kg
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission Guidelines.
FCC ID number: AEZSCP-4930. More information on the phone’s SAR can be
found from the following FCC Website:
http://www.fcc.gov/oet/fccid .