Sanyo Denki Q1AA04003D, Instruction Manual

Page: 94 / 266

５．Parameter
[Parameter setting value【GroupA】]
5−22
Page Contents
Analog monitor output polarity [MONPOL]
Setting
range
Standard value
00
〜
08 00:_MON1+_MON2+
The output polarity of analog monitor output MON1 and
MON2 is selected from the contents below.
13
Selection Contents
00:_MON1+_MON2+
MON1
：
Output the positive voltage at forward rotation (positive direction).
Output the positive/negative voltage.
MON2
：
Output the positive voltage at forward rotation (positive direction).
Output the positive/negative voltage.
01:_MON1-_MON2+
MON1
：
Output the negative voltage at forward rotation (positive direction).
Output the positive/negative voltage.
MON2
：
Output the positive voltage at forward rotation (positive direction).
Output the positive/negative voltage.
02:_MON1+_MON2-
MON1
：
Output the positive voltage at forward rotation (positive direction).
Output the positive/negative voltage.
MON2
：
Output the negative voltage at forward rotation (positive direction).
Output the positive/negative voltage.
03:_MON1-_MON2-
MON1
：
Output the negative voltage at forward rotation (positive direction).
Output the positive/negative voltage.
MON2
：
Output the negative voltage at forward rotation (positive direction).
Output the positive/negative voltage.
04:_MON1A
MON1
：
Output the positive voltage at both forward rotation (positive
direction) and reverse rotation (reverse direction).
MON2
：
Output the positive voltage at forward rotation (positive direction).
Output the positive/negative voltage.
05:_MON1ABS_MON2-
MON1
：
Output the positive voltage at both forward rotation (positive
direction) and reverse rotation (reverse direction).
MON2
：
Output the negative voltage at forward rotation (positive direction).
Output the positive/negative voltage.
06:_MON1+_MON2ABS
MON1
：
Output the positive voltage at forward rotation (positive direction).
Output the positive/negative voltage.
MON2
：
Output the positive voltage at both forward rotation (positive
direction) and reverse rotation (reverse direction).
07:_MON1-_MON2ABS
MON1
：
Output the negative voltage at forward rotation (positive direction).
Output the positive/negative voltage.
MON2
：
Output the positive voltage at both forward rotation (positive
direction) and reverser rotation (reverse direction).
08:_MON1ABS_MON2ABS
MON1
：
Output the positive voltage at both forward rotation (positive
direction) and reverse rotation (reverse direction).
MON2
：
Output the positive voltage at both forward rotation (positive
direction) and reverse rotation(reverse direction).
Setup Software, Communication Axis Number [COMAXIS]
Setting range Standard value
01
〜
0F 01:_#1
The axis number for communication with PC is selected
from the contents below.
✍
The selected value is enabled after turning ON the
control power again.
20
Selection Selection
01:_#1 09:_#9
02:_#2 0A:_#A
03:_#3 0B:_#B
04:_#4 0C:_#C
05:_#5 0D:_#D
06:_#6 0E:_#E
07:_#7 0F:_#F
08:_#8
Setup Software, Communication Baud Rate [COMBAUD]
Setting range Standard value
00
〜
05 05:_38400bps
The baud rate for communication with PC is selected from
the contents below.
✍
The selected value is enabled after turning ON the
control power again.
21
Selection
00:̲1200bps
01:̲2400bps
02:̲4800bps
03:̲9600bps
04:̲19200bps
05:̲38400bps