Sanyo Denki Q1AA04003D, Instruction Manual

Page: 56 / 266

4. Digital Operator
[Various Modes]
4−1
■
Digital Operator
● It is possible to change or set the parameters and to confirm the status display, monitor display, test
operation and alarm history with the built-in digital operator.
■
Digital operator name and functions
■
Displays by Cursor key and Up/Down key
●
Up and Down from “1 to 9”
Press the Up key, and the blinking numeric value of LED display will increase. Press the Down key, and the numeric
value decreases.
●
Up from “9”
Press the Up key, and the numeric value at cursor position increases and shifts to the left digit.
●
Down from “0”
Press the Down key, and the numeric value at cursor position decreases and the numeric values in the left of cursor
position shift to the right.
If there is no numeric value in the left of cursor position, all the left digits from cursor position show 9 with a right shift.
●
Up/Down of “Symbol”
When the display is “0”, “+ data” will be displayed by pressing the Up key and “- data” by the Down key, regardless
of the cursor position. When the display is other than “0”, there will be a left shift or right shift as usual.
（ Display of ” 0 ”＝”００００” , ”０００” , “００”）
The [ ＋ data] has no light on the furthest left digit, and the [ − data] has a symbol of [ − ] on the furthest left digit.
Display
Function Input time
Digital display
Displays monitor value or parameter setting value in five
digits.
WR
To input selections and write edited data
.
More than
1second
MODE
Changes the Mode.
Less than
1 second
Cursor Key. Changes the cursor position when editing.
Less than
1 second
Up/Down key. Changes the numeric value.
Less than
1 second
WR/
MODE
Displays 5 digit, 7 segment LED
【▲】 Up Key
【▼】
Down Key
【
MODE
】
MODE Switch Key
【
WR
】/【 】
Cursor movement, decision, and
writing Key
MODE
WR