manualshive.com logo in svg

SANY SY500H, Operation And Maintenance Manual

The SANY SY500H is a top-of-the-line heavy-duty excavator designed for maximum efficiency and performance. With its advanced technology and superior construction, this robust machine ensures optimal results in various operations. For a comprehensive understanding of its operation and maintenance, download the free Operation and Maintenance Manual from manualshive.com.

Share
Download
background image

4-1

SY500H Excavator OMM

Machine Operation

Work Area   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4

General Job Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Operator Responsibilities  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Seat Belt Usage  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Operation and Maintenance Manual Check  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4
Daily Maintenance Record Check   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4

Cleaning the Machine   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-4

Cleaning the Cab Interior  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-5

New Machine Break-in  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-5
Prestart Checks and Adjustments  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-5
Electrical Components Check   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6

Lights and Warning Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-6

Access Doors, Panels, and Covers  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6

Cab Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6

Opening the Cab Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-6
Closing the Cab Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-7

Emergency Escape Hatch  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-7
Access Door Support Rod  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .   4-7
Right Front Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8

Opening the Right Front Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8
Closing the Right Front Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8

Right Rear Access Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8

Opening the Right Rear Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8
Closing the Right Rear Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8

Left Rear Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-8

Opening the Left Rear Access Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9
Closing the Left Rear Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9

Left Front Access Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9

Opening the Left Front Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9
Closing the Left Front Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9

Fuel Filler Cap   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9

Opening the Fuel Tank Filler Cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9
Closing the Fuel Tank Filler Cap   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-9

Expansion Tank Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Opening the Expansion Tank Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10
Closing the Expansion Tank Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Fresh-Air Access Door  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Opening the Fresh-Air Access Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10
Closing the Fresh-Air Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Engine Access Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10

Opening the Engine Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-10
Closing the Engine Access Door   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-11

Cab Door Windows   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-11
Windshield  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-11

Opening the Windshield    . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  4-11

Chapter 4

Summary of Contents for SY500H





































































































































































































Reviews:

No comments

Related manuals for SY500H

Komatsu PC1250 - Brochure preview
PC1250 -
Brand: Komatsu Pages: 9
Meec tools 721-462 Operating Instructions Manual preview
721-462
Brand: Meec tools Pages: 53

Brands by name

Popular brands

Load more brands