SANY SY500H, Operation And Maintenance Manual

Page: 77 / 196

MACHINE OPERATION
4-7 SY500H Excavator OMM
0004816
Figure 4-3
From inside the cab, press down on the cab door release
lever (6) to open the cab door. Swing the cab door fully
until the catch (3) engages the cab door latch (2).
Closing the Cab Door
0004818
Figure 4-4
To release the door from the opened position, push down
on the release lever (7) and close the door securely.
Emergency Escape Hatch
0004781
Figure 4-5
The emergency escape hatch (1) can be used to exit the
machine if the cab door or windshield cannot be opened
during an emergency.
To open the emergency escape hatch, press the left and
right latches (4) and push up. The emergency escape
hatch is supported in the open position by two pneumatic
cylinders (3).
To close the emergency escape hatch, pull the handle (2)
until right and left latches lock into place.
Access Door Support Rod
0004821
Figure 4-6
The access doors use a support rod (1) and support
bracket (2) to prevent them from closing unexpectedly.
Guide the support rod into the appropriate support
bracket slot to secure the door in the open position.
NOTE: Move the support rod out of the support bracket
slot to close the access door.
6
7
3
2
3
4
1
2
1