SANY SY500H, Operation And Maintenance Manual

Page: 68 / 196

3-38
MACHINE CONTROLS
SY500H Excavator OMM
NOTE: Use this screen to enable the joystick switches for
shear or other two-way flow tool operation and to
adjust the hydraulic oil flow rate for this tool.
2. Press function button F1 (5) or F2 (4) to change the
hydraulic oil flow rate for rotation of this tool.
NOTE: The available range is 0 gpm to 53 gpm (0 Lpm to
200 Lpm).
3. Press function button F4 (2) to move to the
open/close hydraulic oil flow rate adjustment for this
tool.
4. Press function button F1 (5) or F2 (4) to change the
hydraulic oil flow rate for open/close action of this
tool.
NOTES:
• The available range is 0 gpm to 132 gpm (0 Lpm to
500 Lpm).
• The numerical values for gpm and Lpm will change,
and the progress box will fill or empty to indicate the
chosen hydraulic oil flow rate.
5. Press function button F3 (3), then turn the key switch
to OFF and back to ON to enable the joystick
switches for two-way flow tool operation. Confirm the
hydraulic oil flow rates. The Shear icon will appear on
the Tool Select screen.
6. Press function button F5 (1) to return to the Tool
Select screen without making any changes.
Lifting Tool
0004957,0004981
Figure 3-67
1. Select Lifting option. See “Tool Icons” on page 3-36.
2. Press function button F1 (5).
3. Adjust threshold pressure by using the function
button F1 (5).
4. Press function button F3 (3) to confirm selection.
The available range is 0 gpm to 53 gpm (0 Lpm to 200
Lpm).
NOTE: The numerical values for gpm and Lpm will
change, and the progress box will fill or empty to
graphically indicate the selected hydraulic oil flow
rate.
F5 F4 F3 F2 F1
1
2
3 4 5