SANY SY500H, Operation And Maintenance Manual

Page: 63 / 196

MACHINE CONTROLS
3-33 SY500H Excavator OMM
Date/Time Setting Screen
0004957,0004866
Figure 3-57
1. Proceed to this option from the System Setting
screen, then press function button F3 (3).
2. Press function button F1 (1) or F2 (2) to increase or
decrease the value in the flashing year parameter.
3. Press function button F4 (4) to advance to the next
flashing category (month).
NOTE: Repeat steps 2 and 3 to set and advance through
the remaining categories.
4. Press function button F3 (3), then turn the key switch
to OFF and back to ON to confirm the selection.
NOTE: Contact a SANY dealer if you do not have time
zone information (the number of time zones east
or west of 0 degrees longitude).
5. Press function button F5 (5) to return to the System
Setting screen without making any changes.
Data Unit Setting Screen
0004957,0004707
Figure 3-58
NOTE: Use this screen to select which system of units of
measure (metric or Imperial) will be displayed on
the monitor. This screen defaults to highlight the
metric option even with the Imperial format in
effect.
1. Proceed to the Data Unit Setting icon (1) on the
System Setting screen.
F5 F4 F3 F2 F1
3
4
1
2
6
5
F5 F4 F3 F2 F1
4
1
2
3