SANY SY500H, Operation And Maintenance Manual

Page: 123 / 196

MAINTENANCE
5-15 SY500H Excavator OMM
Replace the Engine Oil and Filter
0000737
Figure 5-12
NOTE: Inspect the drained oil and filter for signs of metal
particles and foreign material. Collect a sample of
engine oil for analysis.
WARNING
Do not perform this task when the engine is hot. A
hot engine and components may cause severe
burns or other serious injury. Wait for the engine
to cool before proceeding.
1. Prepare the machine for service. See “Maintenance
Safety” on page 2-4.
2. Remove the machine bottom cover (1) under the
engine compartment.
0004771
Figure 5-13
3. Open the engine access door (2). See “Engine
Access Door” on page 4-10.
0004768
Figure 5-14
4. Loosen either of the two engine oil filler caps (3).
0000738
Figure 5-15
NOTE: For engine oil capacity, see “Location, Capacity,
and Type” on page 5-6.
5. Place a suitable sized container under the engine oil
drain valve (4).
6. Slowly open the drain valve to drain the oil.
1
2
3
4