SANY SY500H, Operation And Maintenance Manual

Page: 47 / 196

MACHINE CONTROLS
3-17 SY500H Excavator OMM
Monitor Console
0004717
Figure 3-28
The monitor (1) displays machine status information,
warnings, and error messages. The operator can access
various screens on the monitor, allowing machine
settings to be changed. See “Monitor” on page 3-25.
12V Power Supply Socket
Use the 12V power supply socket (2) to power or charge
12V accessories.
The sunlight sensor (5) is located on the front of the
monitor console. See “Sunlight Sensor” on page 3-17.
Cup/Ashtray
The cup/ashtray (3) is on the bottom of the console.
Airflow Vents
Airflow vents (4) on the monitor console can be opened,
closed, and rotated.
Sunlight Sensor
NOTICE!
To make sure the automatic functions of the air
conditioning function properly, the sunlight
sensor must be clean. Never obstruct the sunlight
sensor, or it could malfunction.
If the control panel or sunlight sensor gets wet, a
failure may result. Always keep these components
clean and dry. Failure to follow this notice could
damage the machine or cause it to operate
improperly.
0004675
Figure 3-29
The sunlight sensor (1) adjusts the airflow to match the
variation of temperature caused by direct sunlight. It is on
the front of the monitor console.
2
5
3
1
4
1