SANY SY500H, Operation And Maintenance Manual

Page: 57 / 196

MACHINE CONTROLS
3-27 SY500H Excavator OMM
System Service Icons
0004939
Figure 3-45
Home Screen Function Icons and Buttons
0000667
Figure 3-46
1. Press function button F1 (8) to cycle through the five
work modes until the desired mode is displayed (1).
See “Work Mode” on page 3-26.
2. Press function button F2 (7) to enable or disable
auto-idle.
NOTE: The icon (2) illuminates red when this function is
disabled.
3. Press function button F3 (6) to choose between slow
travel speed mode (turtle shown) (3) or fast travel
speed mode (rabbit).
NOTES:
• Use the turtle mode when more power but less
travel speed is required.
• Use the rabbit mode when more travel speed but
less power is required.
4. Press function button F4 (5) to activate or deactivate
the backup camera.
NOTE: The icon illuminates red when the camera is
deactivated.
5. Press function button F5 (4) to proceed to the Main
Menu screen.
Main Menu Screen
1 High engine coolant temperature 9 Diesel exhaust fluid (DEF) alarm
2 High hydraulic oil temperature 10 Not used
3 Low fuel level 11 Not used
4 Low engine coolant level 12 Exhaust system regeneration
5 Blocked air filter 13 Exhaust system regeneration disable
6 Low engine oil pressure 14 Wait to start engine
7 Stop engine 15 High exhaust system temperature (HEST)
8 Check engine 16 Battery charging
1
3 5
2
4
8
7
14 15 16
6
13 12
9
10
11
8
5
6 7
3
2
1
4