5-46
MAINTENANCE
SY500H Excavator OMM
0004742
Figure 5-91
• Backup camera (7)
Check the Backup Camera
0004742
Figure 5-92
1. Make sure the backup camera (1) is operating
correctly and is free of any obstructions.
2. Push function key F4 on the monitor to activate the
backup camera and view activity behind the
machine. Push function key F4 again to turn the
camera off.
Final Drive
Check the Final Drive
1. Prepare the machine for service. See “Maintenance
0004960
Figure 5-93
2. Remove six fasteners (1) and remove final drive
motor cover (2).
0000802
Figure 5-94
3. Inspect the final drive motor (3) and make sure all
hoses are connected tightly.
4. Make sure all fasteners are present and tight.
NOTE:
Replace any damaged or defective fasteners and
tighten any loose fasteners. Use thread lock
compound when reinstalling loose fasteners or
installing new fasteners.
5. Check for leaks.
6. If no issues are found, install the final drive motor
cover.
NOTE:
Use thread lock compound when retightening
loose fasteners and installing new fasteners.
7
1
1
2
3
Summary of Contents for SY500H
