manualshive.com logo in svg

SANY SY500H, Operation And Maintenance Manual

The SANY SY500H is a top-of-the-line heavy-duty excavator designed for maximum efficiency and performance. With its advanced technology and superior construction, this robust machine ensures optimal results in various operations. For a comprehensive understanding of its operation and maintenance, download the free Operation and Maintenance Manual from manualshive.com.

Share
Download
background image

5-2

MAINTENANCE

SY500H Excavator OMM

Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12

Check the Crankcase Breather Tube  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Check the Engine Air Precleaner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Check the Engine Air Filter System   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-12
Replace the Engine Air Filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13
Check the Engine Oil Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
Collect an Engine Oil Sample  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-14
Replace the Engine Oil and Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-15
Check the Engine Belts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Check the Alternator  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Check the Starter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17
Check the Air Intake and the Charge Air Piping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-17

Cooling System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18

Replace the Engine Coolant  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-18
Check the Engine Coolant Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-19
Check the Radiator, Charge Air Cooler, and Air Conditioner Condenser Fins  . . . . . . . . 5-20

Air Conditioning System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21

Check the Air Conditioner  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Check the Air Conditioner Compressor Belt  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Adjust the Air Conditioner Compressor Belt  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-21
Replace the Fresh-Air Filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-22
Replace the Cab Recirculation Filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

Exhaust System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23

Check the Aftertreatment Exhaust Piping  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Check the Engine Exhaust Pipe Clamps   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-23
Replace the Diesel Exhaust Fluid (DEF) Pump Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-24
Check the Diesel Exhaust Fluid (DEF)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
Fill the Diesel Exhaust Fluid (DEF) Tank   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-25
Replace the Diesel Exhaust Fluid (DEF) Tank Filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-26
Stationary Regeneration  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-27

Fuel System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28

Check the Fuel Level   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
Check the Fuel Lines   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
Drain the Fuel Tank   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
Check the Fuel Tank Strainer  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-28
Replace the Primary and Secondary Fuel Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-29
Drain the Primary Fuel Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30

Hydraulic System  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30

Check the Accumulator Function   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-30
Relieve Hydraulic System Pressure  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-31
Collect a Hydraulic Oil Sample  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
Replace the Case Drain Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-32
Check the Hydraulic Oil Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33
Check the Hydraulic Hoses . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-33
Check the Hydraulic Hose/Line Connections  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34
Add Hydraulic Oil   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-34
Replace Hydraulic Oil  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-35
Replace the Hydraulic Pilot Filter Element  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-37
Check the Hydraulic Pump  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38
Replace the Hydraulic System Breather Filter   . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-38
Check the Hydraulic Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40
Replace the Hydraulic Tank Return Filter  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-40

Summary of Contents for SY500H





































































































































































































Reviews:

No comments

Related manuals for SY500H

jcb 16c-1 Service Manual preview
16c-1
Brand: jcb Pages: 51
Zipper Mowers ZI-MBGS600 User Manual preview
ZI-MBGS600
Brand: Zipper Mowers Pages: 99
Wacker Neuson 1000164553 Operator'S Manual preview
1000164553
Brand: Wacker Neuson Pages: 188
Hyundai HX130 LCR Manual preview
HX130 LCR
Brand: Hyundai Pages: 612

Brands by name

Popular brands

Load more brands