SANY SY195C9 Shop Manual Download Page 631

Page: 631 / 681

SANY LATIN AMERICA

8-128

SY195/205/215/225C9 Crawler Hydraulic Excavator

Disassembly and Assembly

Shop Manual - June 2013

●

Dry the primer for at least 5 minutes
(within 8 hours).

●

Do not use wrong priming paint.

If, for example, glass primer is mistak-
enly used, wash it with unleaded gaso-
line.

4) Apply priming paint (for glass surface)

onto the contact surface of window
glass (9).

Glass primer:

Sunrise MSI Primer 35

●

Do not apply the primer more than
twice; otherwise, the performance of
the primer will be reduced.

●

Priming area: Apply the priming paint
on the contact surface of glass (9)
(rubber seal (6)adhering location) and
along cab frame (8).

●

Leave a 5 mm margin uncoated along
the black strip adjacent to the clear
area of the glass.

●

When priming paint has been coated,
dry it for at least 5 minutes (within 8
hours).

●

Do not use wrong primer.

If wrong glass primer is used, wash it
with unleaded gasoline.

ZX215-1006234

ZX215-1006235

ZX215-1006236

https://www.tractormanualpdf.info/

Summary of Contents for SY195C9










































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SY195C9

Reviews:

Related manuals for SY195C9

Brands by name

Popular brands

SANY SY195C9, Shop Manual

Search results

Summary of Contents for SY195C9

Reviews:

Related manuals for SY195C9

Brands by name

Popular brands