SANY SY195C9 Shop Manual Download Page 509

Page: 509 / 681

SANY LATIN AMERICA

8-6

SY195/205/215/225C9 Crawler Hydraulic Excavator

Disassembly and Assembly

Shop Manual - June 2013

8.2 Operating Precautions

The following precautions must be observed before removing or installing (disassembling or as-
sembling) a component.

1. Precautions to be observed prior to removal operation

●

Dispose the engine coolant properly if antifreeze is contained in the engine coolant.

●

After disconnecting a hose or tube, cover or plug must be used to prevent invasion of dirt
or dust.

●

A suitable container must be prepared to collect oil when draining the oil.

●

Matching mark must be made at where is necessary before removing in order to avoid
mistake during reinstallation.

●

Do not pull the wire and avoid the wire coming off. To avoid excessive force imposing on
the wire, hold the connector when disconnecting a wire.

●

Tag the wires and the hoses in order to ensure their connecting positions. By doing so,
mistakes can be avoided during reinstallation.

●

Count and check the number and thickness of the shims, and keep them in a safe place.

●

When raising or lifting components, be sure to use proper lifting equipment of ample
strength and safety.

●

When forcing screws are used to remove any components, tighten the screws evenly in
turn.

●

The surrounding area must be cleaned before removing a unit. Cover the unit after remov-
al in order to prevent invasion of dirt or dust.

8.1.4 The symbols used in this section

This section uses some symbols and icons that are not used elsewhere in this manual. They in-
clude:

This symbol indicates the amount of oil or water to be discharged.

This symbol indicates that speci

c coating agent must be used.

This symbol indicates the lubricant required.

This symbol indicates a torque speci

ed.

This symbol indicates the amount of oil or water to be added.

This symbols indicates the weight of a component or an assembly.

https://www.tractormanualpdf.info/

Summary of Contents for SY195C9










































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for SY195C9

Reviews:

Related manuals for SY195C9

Brands by name

Popular brands

SANY SY195C9, Shop Manual

Search results

Summary of Contents for SY195C9

Reviews:

Related manuals for SY195C9

Brands by name

Popular brands