V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230239
A COMMITMENT TO SAFETY
SandenVendo America, Inc. is committed to safety in every aspect of our product design.
SandenVendo America, Inc. is committed to alerting every user to the possible dangers involved
in improper handling or maintenance of our equipment. The servicing of any electrical or
mechanical device involves
potential hazards
, both to those servicing the equipment and to
users of the equipment. These hazards can arise because of improper maintenance techniques.
The purpose of this manual is to alert everyone servicing SandenVendo America, Inc. equipment
of potentially hazardous areas, and to provide
basic safety guidelines
for proper maintenance.
This manual contains various
warnings
that should be carefully read to minimize the risk of
personal injury to service personnel. This manual also contains service information to insure that
proper methods are followed to avoid damaging the vendor or making it unsafe. It is also
important to understand these
warnings
are not exhaustive. SandenVendo America, Inc. could
not possibly know, evaluate, or advise of all of the conceivable ways in which service might be
done. Nor can SandenVendo America, Inc. predict all of the possible hazardous results. The
safety precautions outlined in this manual provide the basis for an effective safety program. Use
these precautions, along with the service manual, when installing or servicing the vendor.
We strongly recommend a similar commitment to safety by every servicing organization. Only
properly-trained personnel should have access to the interior of the machine.
This will
minimize the potential hazards that are inherent in electrical and mechanical devices.
SandenVendo America, Inc. has no control over the machine once it leaves the premises. It is the
owner or lessor’s responsibility to maintain the vendor in a safe condition. See Section I of this
manual for proper installation procedures and refer to the appropriate service manual for
recommended maintenance procedures. If you have any questions, please contact the Technical
Services Department of the SandenVendo America, Inc. office nearest you.
SAFETY RULES
•
Read the Safety Manual before installation or service.
•
Test for proper grounding before installing to reduce the risk of electrical shock and fire.
•
Turn off power switch or disconnect power cord from wall outlet before servicing or
clearing product jams. The vending mechanism can trap and pinch hands.
•
Use only fully-trained service technicians for Power- On servicing.
•
Remove any product prior to moving a vendor.
•
Use adequate equipment when moving a vendor.
•
Always wear eye protection, and protect your hands, face, and body when working near
the refrigeration system.
•
Use only authorized replacement parts.
•
Be aware of inherent dangers in rocking or tipping a vending machine.
•
Always turn power off before plugging or unplugging vendor to wall outlet.
V21
Safety | S-2
