V21 Parts & Service Manual
All V21 Identified Equipment
REV A – 10/2013
P/N: 1230328
Sales Data:
Allows you to retrieve historical information regarding the number of units sold by vendor. To
clear the individual selection sales data, you must have the MIS Auto Reset in the
“Configuration” mode turned ON.
•
Press (2) when the display reads “Sales Data”
•
The non-resettable historical data is displayed
•
To display resettable individual selections, press (1)
•
To reset historical data, make sure the MIS Auto Reset is turned ON in the “Configuration”
mode.
•
To exit mode, press (3)
Set Price:
Allows you to set the vend price of each selection. In this mode, you have the option of pricing
each selection button at the same vend price or price each selection button independently.
•
Press (2) when display reads “Set Price”
•
Pressing (1) will allow you to choose selections or “All”
•
Pressing (2) will start the current vend price flashing
•
Press (1) to increase/decrease the price
•
Press (2) to save your new programmed price
•
Press (3) to exit mode
Set Depth:
Allows you to set the depth of each column. In this mode, you have the option of setting the
columns for single, double, triple or quadruple depths.
•
Press (2) when the display reads “Set Depth”
•
Pressing (1) will allow you to choose columns or “All”
•
Pressing (2) will enter you into the column and start the depth flashing
•
Press (1) to scroll through the depth settings (1-4)
•
Press (2) to save your new depth setting
•
Press (3) to exit mode
V21 12.3
Programming HVV | P4-5
