P-25
Part #1167879 08/2008
16. Press Button 2 to set the hh
17. Press Button 4 to ‘save’ setting – mm flashes
18. Press Button 2 to set: mm
19. Press Button 4 to ‘save’ setting
20. Press Button 1 to exit – Start Time 1
21. Advance on Button 2 – Stop Time 1
22. Enter on Button 4
23. Follow the steps outlined above to complete Stop Time 1, Start Time 2, Stop Time 2
24. Press Button 2 to advance
TempLO (Temperature Lock Out):
1. Enable timing feature in configuration
2. Advance on button 2 to TempLO shelf 1
3. Press Button 4 – Disable will flash
4. Advance on Button 2 – Enable
5. Press Button 4 to ‘save’ setting
6. Continue in above manner for all shelves associated with Temperature Lockout
Note: The Temperature Lockout Feature (TempLO) requires an additional temperature sensor
connected at the top left on the inside of the cabinet. When the cabinet temperature is above
41ºF/ 3.5 ºC for more then 15 minutes, the vendor will shut down any shelves associated with the
Temperature Lockout Feature.
Sales Block: (8 Blocks are available in this Mode)
‘Timing Features’ in Configuration Mode must be turned ‘On’ to access this feature. Sales Block
allows the operator to turn Selections On/Off at 8 intervals during a 24-hour period. Times must
not overlap. You must enter the following information:
Selections – the selection buttons that will be disabled during the blocked time
Start Time – the time selections will be ‘Off Line’
Start Days – the days selections will be ‘Off Line’
Stop Time – the time selections will turn back ‘On’
Stop Days – the days selections will turn back ‘On’
Sales Block 1:
1. Press Button 4 - Enable On/Off, Light
Enable Off – Block Function is disabled
Enable On – Block Function is enabled
Enable Light – Block Function is enabled and lights are off when blocking occurs
2. Press Button 4 – On/Off Light flashes
3. Press Button 2 to advance to desired setting
4. Press Button 4 to ‘save’ setting – your choice will display
5. Press Button 2 to advance to – Selections
Summary of Contents for Vendo Vue SXY 30
