Sanden Vendo Vue SXY 30, Manual

Page: 56 / 128

P-24
Part #1167879 08/2008
11. Advance on Button 2 – Degree F/C
12. Enter on Button 4 – current setting flashes
13. Press Button 2 to scroll between F/C
14. Press Button 4 to save desired setting
Fan Default:
Default Mode: Fan on/off behaves in same respect as the compressor.
Mode 1: Fan is time delayed with compressor cut in/cut out
1. At cut in, fan will come on 1 minute after compressor turns on
2. At cut out, fan will continue to run 1 minute after compressor is off
3. Fan off with door switch activation
Periodic Defrost:
1. Press Button 4 – On/Off
2. Press Button 4 – On/Off flashes
3. Advance on Button 2 to desired setting
On – The vendor will defrost every 6 hours for 30 minutes. This feature is used in
extremely high humidity environments.
Off – The vendor will not defrost every 6 hours.
4. Press Button 4 to ‘save’ setting
5. Press Button 1 to exit to Main Menu
When ‘Timing Features’ in Configuration are turned ‘On’, the following Modes are accessible:
Refrigeration – Enable Timer On/Off
Start Time – Start Day 1/2 – Mon-Sun/All
Start hh:mm
Stop Time – Stop Day 1/2 – Mon-Sun/All
Stop hh:mm
Enable Timer:
1. Press Button 2 or 3 to scroll until “Enable Timer” is displayed
2. Press Button 4 – On/Off flashes
3. Advance on Button 2 to desired setting
4. Press Button 4 to ‘save’ setting
5. Press Button 2 – Start Time 1. Time Refrigeration turns off/begin conservation
6. Press Button 4 – Start Day 1
7. Press Button 4 - current setting appears
8. Press Button 4 – current setting flashes
9. Press Button 2 or 3 to scroll through days of the week or ‘Every Day’
10. Press Button 4 – On/Off flashes
11. Advance on Button 2 to desired setting
12. Press Button 4 to ‘save’ setting
13. Press Button 1 to exit – Start Day 1
14. Press Button 2 to advance to Start 1 hh:mm
15. Press Button 4 at Start 1 hh:mm – hh flashes