Sanden Vendo Vue SXY 30, Manual

Page: 51 / 128

P-19
Part #1167879 08/2008
Off – Credit established will remain until either a vend is made or the coin return is
pressed.
Force Vend:
On - The consumer will not be able to deposit money, press the coin return and
receive change without attempting a vend first.
Off – Vendor is set as a ‘change’ machine. Consumer can deposit money, press the
coin return and receive change.
Multi-Vend:
On - The consumer may insert sufficient credit to make multiple purchases.
Remaining credit will display until consumer either makes another selection
or presses the coin return.
Off – Consumer makes a single purchase and change is returned immediately.
Deny Escrow:
On - Validator will stack all bills received
Off – Validator will ‘hold’ the bill in ‘escrow’ until the vend is complete.
if the consumer presses the coin return the ‘bill’ is returned to them.
S/O (Error) Indicator:
On - A small symbol - (♦) will appear in the lower right hand corner of the display
when the vendor detects an error or a sold out column.
Off – The symbol will not appear.
Count by Selection/Price:
Count by Selection – Individual Sales and Cash Data are displayed.
Count by Price – Individual Sales and Cash Data is reported by vend price.
MIS Reset with DEX:
On - Non-Historical MIS Data will reset when a DEX read has been done.
Off – No MIS Data will be reset.
Double Talk: - This is a kit supplied by a third party source**
On - Module will vocalize messages.
Off – Module will not vocalize messages.
Display Scroll:
On - Messages ‘Scroll’ from left to right side of display.
Off – Messages do not scroll.
Display Temperature:
Off – Cabinet temperature will not display.
Ref – Internal Refrigeration Temperature will display as ‘Refrigeration Temperature’.
Cbt – Internal Cabinet Temperature will display as ‘Cabinet Temperature’. **
** Note: Requires Temperature Lockout Kit in order to display
Vend Protect:
On – The ‘Hand’ will stay next to the flap until product is removed/ bucket closes.
Off – The ‘Hand’ will return to the ‘Home’ position after product is delivered to the vend flap.
PDC Wait Time: (Available only in VMC Rev. 1.20 and PDC Rev. 1.16)
Default: 30s
Off/15s/30s/45s/45s/60s - PDC waiting time at the center after a vend.