Sanden Vendo Vue SXY 30, Manual

Page: 39 / 128

P-7
Part #1167879 08/2008
Test Mode Vend Specific Column:
1. Still in Test Mode, Press Button 2 to scroll until “Vend Specific Column” is displayed.
2. Press Button 4 to Enter.
3. Close outer door.
4. Display will read ‘Test Vend Column No. #XX’.
5. Press 2/3 to choose the column number, Press 4 to vend, Press 1 to Exit.
The vendor will revert back to sales mode if it is idle for 5 minutes.
Test Mode Test Hopper Flap:
1. Still in Test Mode, Press Button 2 to scroll until “Test Hopper Flap” is displayed.
2. Push Button 4 to Enter. – Testing in Progress –
3. Exit on Button 1.
Test Mode Test Hopper Bucket:
1. Still in Test Mode, Press Button 2 to scroll until “Test Hopper Bucket” is displayed.
2. Push Button 4 to Enter. – Testing in Progress –
3. Exit on Button 1.
Test Mode Test Vend Detection:
1. Still in Test Mode, Press Button 2 to scroll until “Test Vend Detection” is displayed
2. Push Button 4 to Enter – Display will read ‘Testing in Progress’ followed by:
STANDARD FONT DISPLAY
●●●
– there is nothing blocking the optics, or
○○○ –
optics are blocked.
EUROPEAN FONT DISPLAY
∑ ∑ ∑
– there is nothing blocking the optics, or
σ σ σ –
optics are blocked.
Hopper Bucket will open to allow blocking/ unblocking of the optics.
3. Exit on Button 1.
Test Mode Test Motors:
After completion of work in Test Motors, please ensure that X, Y, Z and Clamp Motors have
returned to the ‘Home’ position before closing the outer door.
1. Press Button 2 to scroll until “Test Motors” is displayed.
2. Press Button 4 to Enter.
Test Motors X Motor:
1. Still in Test Motors, Press Button 2 to scroll until “X Motor” is displayed.
2. Enter on Button 4 – ‘Pls wait….Entering Test Motors Mode’, followed by ‘Test
Motors X Motor’ – Rail should move to the top of the vendor.
3. Enter on Button 4 – X Motor Go Home.