Samyung ENC SMR-715 series, Instruction Manual

Page: 121 / 192

95
Chapter 7 INITIAL SETTINGS
7.9.3 BEACON SETTING
Set for a JRC Beacon (DGPS receiver). This setting is available only for JRC Beacon receiver (DGPS
receiver).
AUTO: Select an optimum beacon station automatically.
Manual: You need to set the beacon frequency and baud rate by yourself.
Note: This setting is enabled
when “Station Select” is set to “Manual”.
7.9.4 SBAS SETTING
AUTO: Automatically selects the SBAS satellite number.
Manual: Manually enter the SBAS satellite number.
Note: This setting is enabled
when “Station Select” is set to ”Manual”.
Set the beacon Station.
*
Set the beacon frequency. **
Set the beacon baud rate. **
Send configured data to
the beacon.
Set the selection mode
for satellite number to be
used.
*
Set whether or not the
SBAS satellite is to be
used as positioning
satellite.
Set the SBAS satellite
number to be used.
**
Send configured data to
the SBAS receiver.