VXS-9080SCL
INSTALLATION GUIDE
PAGE 1 of 2
BEFORE BEGINNING YOUR INSTALLATION
Read through the whole instruction guide before getting started with the installation. Professional installation is
recommended for this product.
CONTENT
12V Motor Driven Electric Siren (Red/Grey)
SAFETY INSTRUCTIONS
This product produce a very loud sound. Hearing loss or permanent damage may result from unsafe use.
Never operate this product in a closed environment or near pedestrians.
Do not connect the siren to any power source other than that specified above.
MOUNTING
Identify a suitable area for mounting, preferably an unobstructed sheet-metal surface like the frame or body of
the vehicle so as to provide a firm platform which will help protect the siren from damage due to excessive
shaking. Do not attach the siren to any plastic or other flexible material.
Using the bracket as a guide estimate and mark the positions for the holes and then perforate to size using a
drill.
Secure the siren to the vehicle using two screws (not provided).
Adjust the vertical angle of the siren using the two screws on each side.
The specific voltage requirement for this siren is 12 volt DC. Therefore installation must be done
with a DC power source of 12 volts.
