VXS-9080SCL
INSTALLATION GUIDE
PAGE 2 of 2
ELECTRICAL CONNECTIONS
Expose the wires terminals by taking out the two screws that are on the bottom of the siren.
Attach one wire on each terminal and route the cable trough the cable grommet.
Connect the positive wire of the siren to your vehicle's power source and ground the negative wire of the
siren.
To activate the siren install a switch (not included) on the ground cable. If the siren is going to be installed as
part of an anti-
theft alarm system please follow your device’s instructions.
We highly recommend that you use a 10A fuse (not provided) to assure that the circuit remains safe and will
not be damaged by excess current.
