Samyung ENC SMR-715 series, Instruction Manual

Page: 126 / 192

100
Chapter 8 DETAIL PERFORMANCE SETTINGS
8.2 TT FUNCTION
Do not change the quantization level settings unless absolutely necessary.
If set at an inappropriate value, the acquisition or tracking function of the
target tracking function (TT) deteriorates, and this may lead to accidents.
Vector Constant: Vector shows the movement of the target. When Vector Constant is large, vector is stable,
but the response is slow. When Vector Constant is small, vector is unstable, but the
response is quick.
Gate Size: Set up the region size which can search the movement target automatically. When region is
wide, possible to track fast moving target, but many clutters are include. Sometime do miss
tracking because of much noise. When region is narrow, possible to track stable, but fast
moving targets are tend to lost. Because of fast target soon goes outside of the region.
Gate Display: Set the display on/off of target detection area (gate) for target trail function.
Note:
The TT function requires own ship’s heading and
GPS signal (COG/SOG) information . If there are not
these information, TT function does not function correctly.
①Tap .
②Input code “0” and tap ENT.
③Tap “TT”.
④Tap the desired menu.
or