Samsung XRN-1610S User Manual Download

Page: 61 / 82

SeArCH vIeWer

You can search and play the video record saved in NVR by accessing NVR remotely.

Search viewer Screen

Item

Description

Menu Selection

Switches to the corresponding menu screen by clicking each menu.

Calendar

Displays the video-recorded date in blue. Click the date in blue color to display the recorded

video information in timeline.

Channel selection

Displays the search channels.

Search for the user designated channel for the selected date.

Text Search

Searches data that was entered into POS systems connected to NVR.

Channel displays

Display the selected channel number.

Item

Description

Audio

Sets the sound connected to each channel to either ON/OFF.

Capture

Saves current video for selected channel in the designated path.

Prints current video image for selected channel through the assigned printer.

Section backup

Backup the video for the selected section.

Image rotation

Rotates the screen of a selected channel by 90 degrees.

Keep ch. scr ratio

Changes screen ratio of the selected channel.

Keep full scr ratio

Changes screen ratio for all channels.

Digital Zoom In/Out

Zoom in or zoom out the current video for the selected channel.

OSD

Displays the channel information.

Full screen

Show the four way split screen in the full screen.

Sound control

Adjust the audio for the video searched.

Fisheye

Runs the fisheye settings for the selected channel.

(Configures the mounting mode and the view mode to correct the screen distortion.)

Recording Color

Displays the corresponding color depending on recorded data type if you place your mouse

cursor on that area.

Display Pane

Plays corresponding data on the screen if you select a search result.

Time Search

You can search recorded data by setting date and time.

To search by date

You can select the search date by using calendar.

Click on < , > to select the year/month for your search.

If a date has data associated with it, it is displayed in blue. The current date is displayed as a blue box.

Click the date to search in calendar.

The first image of searched video data on the date is displayed on screen and the data is displayed in the

timeline.

To search video data on today, click <

Today

Today's date is selected.

English

_61

●

search viewer

Summary of Contents for XRN-1610S



















































































Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands

Samsung XRN-1610S, User Manual

Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands