Samsung XRN-1610S User Manual Download

Page: 23 / 82

English

_23

●

LIve

audIo on/off

You can turn the sound on/off corresponding to the channel in Live mode.

audIo on/off in Single mode

Click on the audio icon ( ) on the screen to turn it ON/OFF.

If you have configured the audio output settings properly but the audio or voice is not output, check if the connected network

camera supports the sound signal and if you have configured the sound settings as appropriate.

The sound icon can be displayed if the sound signal fails to output from noise.

Only the channel where <

AUDIO

> is set to <

> in "

Setting the Device

Camera

" displays the audio icon ( ) in Live

mode that you can use to turn the sound on/off.

freeZe

This is available only in Live mode, this pauses playing the Live image temporarily.

Click < > of the launcher mode.

Video playing is paused.

Click on < >.

Pause is canceled. Playing is resumed.

event monItorIng

This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs.

In "

monitor

event display

", set the event monitoring to ON/OFF and specify the event display time. (Page

)

•

If multiple events occur simultaneously, the screen will switch to a split mode.

- 2~4 events : 4-split mode

- 5~9 events : 9-split mode

- 10~16 events : 16-split mode

•

If the second event occurs within the set time of <

event display

>, the first event will last until the second one

is terminated.

Ex : If you set <

Event Display

> to 5 seconds, and only one event occurs in CH 1.

CH1

CH2

CH1

CH2

CH6

CH8

CH10

CH11

CH12

CH13

CH3

CH4

CH5

CH7

CH9

CH1

CH5

CH6

CH7

CH8

CH2

CH3

CH4

CH2

CH3

CH2

CH3

CH4

CH2

CH3

CH4

CH5

CH6

CH4

CH5

CH6

CH7

CH8

CH9

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH1

CH2

CH3

CH4

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH7

CH2

CH3

CH4

CH5

CH6

CH1

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH3

CH1

CH2

CH1

CH2

CH3

CH4

CH1

CH7

CH8

CH4

CH3

CH2

CH5

CH1

CH6

CH12

CH1

CH13

CH19

CH4

CH7

CH5

CH10

CH8

CH11

CH6

CH2

CH3

CH4

CH5

CH2

CH6

CH1

CH3

CH7

CH8

CH9

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH1

CH4

CH5

CH2

CH6

CH1

CH3

CH7

CH8

CH9

CH13

CH14

CH11

CH15

CH10

CH12

CH16

CH1

CH3

CH2

CH4

CH5

CH6

CH1

CH2

CH1

CH2

CH3

CH1

CH15

CH11

CH16

CH12

CH7

CH3

CH8

CH4

CH13

CH9

CH14

CH10

CH5

CH1

CH6

CH2

CH15

CH11

CH16

CH12

CH1

CH3

CH8

CH4

CH13

CH9

CH14

CH10

CH5

CH7

CH6

CH2

Event occurrence

5 seconds

Stop alarm

Ex : If you set <

Event Display

> to 5 seconds, and the second event occurs in CH 2 within the set time after the first event

occurred in CH 1.

Select <

Stop Alarm

> to initialize the status of alarm output and release the event function.

If an alarm is output with the pre-event and post-event times specified together with the event recording settings, the event

recording will perform according to the specified recording type (pre event or post event).

In case of continuous events such as motion detection, switching to another split mode display may not immediate if

concatenating events follow, even when you stopped alarm of the event.

The video may be delayed depending on the network condition.

The event output can be delayed as the transfer of the alarm event from the network camera takes time.

capture

You can capture a screen selected on the live screen.

Function to perform in single channel mode on the live screen or when selecting a channel.

Select <

capture

> from the live screen menu.

You can click on < > in the launcher menu.

Select the output information to be displayed on the captured screen.

When you select the <

Description

> check box, a window to enter a description is opened and you can enter up to 50 Korean

letters.

Select a device to save a captured file, file path and file name.

Complete the settings and click <

>, then the image captured from the screen is saved to the selected

device.

CH1

CH2

CH1

CH2

CH6

CH8

CH10

CH11

CH12

CH13

CH3

CH4

CH5

CH7

CH9

CH1

CH5

CH6

CH7

CH8

CH2

CH3

CH4

CH2

CH3

CH2

CH3

CH4

CH2

CH3

CH4

CH5

CH6

CH4

CH5

CH6

CH7

CH8

CH9

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH1

CH2

CH3

CH4

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH7

CH2

CH3

CH4

CH5

CH6

CH1

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH3

CH1

CH2

CH1

CH2

CH3

CH4

CH1

CH7

CH8

CH4

CH3

CH2

CH5

CH1

CH6

CH12

CH1

CH13

CH19

CH4

CH7

CH5

CH10

CH8

CH11

CH6

CH2

CH3

CH4

CH5

CH2

CH6

CH1

CH3

CH7

CH8

CH9

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH1

CH4

CH5

CH2

CH6

CH1

CH3

CH7

CH8

CH9

CH13

CH14

CH11

CH15

CH10

CH12

CH16

CH1

CH3

CH2

CH4

CH5

CH6

CH1

CH2

CH1

CH2

CH3

CH1

CH15

CH11

CH16

CH12

CH7

CH3

CH8

CH4

CH13

CH9

CH14

CH10

CH5

CH1

CH6

CH2

CH15

CH11

CH16

CH12

CH1

CH3

CH8

CH4

CH13

CH9

CH14

CH10

CH5

CH7

CH6

CH2

CH1

CH2

CH1

CH2

CH6

CH8

CH10

CH11

CH12

CH13

CH3

CH4

CH5

CH7

CH9

CH1

CH5

CH6

CH7

CH8

CH2

CH3

CH4

CH2

CH3

CH2

CH3

CH4

CH2

CH3

CH4

CH5

CH6

CH4

CH5

CH6

CH7

CH8

CH9

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH1

CH2

CH3

CH4

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH7

CH2

CH3

CH4

CH5

CH6

CH1

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH3

CH1

CH2

CH1

CH2

CH3

CH4

CH1

CH7

CH8

CH4

CH3

CH2

CH5

CH1

CH6

CH12

CH1

CH13

CH19

CH4

CH7

CH5

CH10

CH8

CH11

CH6

CH2

CH3

CH4

CH5

CH2

CH6

CH1

CH3

CH7

CH8

CH9

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

CH9

CH10

CH11

CH12

CH13

CH14

CH15

CH16

CH1

CH4

CH5

CH2

CH6

CH1

CH3

CH7

CH8

CH9

CH13

CH14

CH11

CH15

CH10

CH12

CH16

CH1

CH3

CH2

CH4

CH5

CH6

CH1

CH2

CH1

CH2

CH3

CH1

CH15

CH11

CH16

CH12

CH7

CH3

CH8

CH4

CH13

CH9

CH14

CH10

CH5

CH1

CH6

CH2

CH15

CH11

CH16

CH12

CH1

CH3

CH8

CH4

CH13

CH9

CH14

CH10

CH5

CH7

CH6

CH2

Event occurrence

4 seconds

9 seconds

Stop alarm

Summary of Contents for XRN-1610S



















































































Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands

Samsung XRN-1610S, User Manual

Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands