Samsung XRN-1610S User Manual Download

Page: 44 / 82

Video Loss Detection

You can set the camera so that the camera can trigger the alarm if it is disconnected or the video is lost due to

unstable network connection.

•

Apply to CH : If you select <

Apply to Ch

>, the "

Apply to Ch

" confirmation window will appear.

After selecting channels that the settings will be applied to, click on <

> to apply them to the selected

channels.

•

Video Loss State : Specify the use of video loss detection.

•

Alarm Out : Select an alarm output method.

For further information on alarm output, refer to "

HDD Alarm

Alarm

". (Page 39)

•

Alarm Duration : Specify the duration of the alarm output with the beep.

Alarm Out Schedule

You can set the conditions and operating hours for scheduled alarms.

•

Alarm Out : Sets the alarm output method.

For further information on alarm output, refer to "

HDD Alarm

Alarm

". (Page 39)

- <

> : Marked in green, and always generates alarm on scheduled time.

- <

OFF

> : Marked in black, no alarm is generated even if an event occurs.

- <

event Sync

> : Marked in orange, generates alarm only when an event occurs.

•

Apply to All Alarm out : Applies the configured schedule to all alarms.

When the alarm is generated on the scheduled time, you can stop the alarm by canceling the schedule.

44_

menu setup

Summary of Contents for XRN-1610S



















































































Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands

Samsung XRN-1610S, User Manual

Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands