Samsung XRN-1610S User Manual Download

Page: 55 / 82

Description

Channel information

Shows the channel information selected.

If the user's PC monitor does not support 60Hz at a specific high resolution, or the HDMI

cable does not support HDMI 2.0, 60fps or higher will not be output from the channel

information.

Freeze

Temporarily stops the videos in all the channels or deactivates the Pause function in

suspending status.

Stop Alarm

Deactivates an alarm when it occurs.

OSD

Check the OSD item to display the OSD screen information in the web viewer window.

PC recording

Saves the real-time video, in AVI format, from the selected channel in a designated folder on

the PC.

NVR recording

Start and stop NVR recording.

Layout setting

Set the layout.

Sequence Setup

Set the sequence.

PTZ

Controls connect PTZ camera(s).

Fisheye

Runs the fisheye settings for the selected channel.

(Configures the mounting mode and the view mode to correct the screen distortion.)

Display Pane

Displays the video of camera connected to NVR.

Text

Turns text devices and data output located in the right side of Search ON/OFF.

Display the ID of user connected.

Quick setup

Simple camera registration and recording settings.

Manual backup

Manually backup the video of the camera connected.

Status

Shows the camera live and recording status.

Help

Move to the help window.

Logout

Performs logout process.

Shutdown

Turn off the NVR system.

LIve vIeWer

You can check the video from camera registered in the NVR connected from a remote PC. Also, you can adjust the

camera and check the network transfer status.

Live viewer Screen

Description

System Stauts

Indicator

Displays icons to display the screen or system status.

Menu Selection

Switches into corresponding menu screen by clicking each menu.

Date/channel

Shows the access date/time and the selected channel.

Audio

Sets the sound connected to each channel to either ON/OFF.

Capture

Saves current video for the selected channel in the path designated by the user.

Prints current video image for the selected channel through designated printer.

Image Rotation

Rotates the screen of a selected channel by 90 degrees.

Keep ch. scr ratio

Changes screen ratio of the selected channel.

Keep full scr ratio

Changes screen ratio for all channels.

Channel change

Switches to the previous/next channel group.

Full screen

Switch from the full screen to the split screen.

Press the [

ESC

] key on the keyboard to exit full screen mode.

Safari for Mac does not support full screen mode.

English

_55

●

live viewer

b
c

f
g

Summary of Contents for XRN-1610S



















































































Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands

Samsung XRN-1610S, User Manual

Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands