Samsung XRN-1610S User Manual Download

Page: 18 / 82

18_

live

Split mode menu

In Live split mode, right-click to display this context menu as shown.

The context sensitive menu in split mode differs, depending on the login/logout status.

Description

Screen Mode

Select a screen mode for the Live screen.

Refer to “

Live screen mode

”. (Page

)

CH Info

It displays the camera connection information for each channel.

Refer to the “

Channel Information

”. (Page

)

Live Status

Shows the live status of connected camera to each channel.

Refer to “

Live Status

”. (Page

)

Record Status

Shows the record status of each channel.

Refer to “

Record Status

”. (Page

)

PoE Status

Set the PoE status in each channel. (XRN-1610S only)

Refer to the “

PoE Status

”. (Page 22)

Layout

Set the layout of each channel.

Refer to “

Layout

”. (Page

)

Audio On/Off

Turns ON/MUTE the sound of the selected channel.

Refer to “

Audio ON/OFF

”. (Page

)

Freeze

Stop playing the video temporarily. Refer to “

Freeze

”. (Page

)

Stop Alarm

Stop the alarm output, deactivate the event icon and release the auto sequencing.

Refer to "

Event Monitoring

". (Page

)

Record/Stop

Starts/stops the standard recording.

Description

Keep full scr ratio/

Keep ch. scr ratio

Channel screen ratio is changed.

Refer to "

Maintain the Screen Ratio

". (Page

)

Play

Refer to "

Search & Play

Play

". (Page 52)

Refer to "

Search & Play

". (Page 50)

Backup

Searches for a backup device and runs backup for each channel or schedule backup later at a

more preferable time. (Page

)

Enter the main menu. Refer to the menu settings. (Page

)

Quick Setup

The “

Camera Register

” & “

Recording Setup

” screen will immediately appear.

Quick Setup is unavailable in XRN-1610S PnP mode.

Shutdown

The system shutdown dialog will appear.

Show/Hide Launcher

Shows or hides the launcher. Refer to "

View the Launcher Menu

". (Page

)

You can log in or out.

Scene Mode

►

CH Info
Live Status
Record Status

PoE Status

Layout

►

Audio Off
Freeze
Stop Alarm
Record
Keep full scr ratio
Play
Search
Backup
Menu
Quick Setup

►

Shutdown
Hide Launcher
Logout

Summary of Contents for XRN-1610S



















































































Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands

Samsung XRN-1610S, User Manual

Search results

Summary of Contents for XRN-1610S

Reviews:

Related manuals for XRN-1610S

Brands by name

Popular brands