Samsung SRN-6450 User Manual Download Page 83

Page: 83 / 130

Note

While an HDD is being checked, new data is not saved in the HDD or its RAID

array. However, if another HDD or another HDD array is available then new
data is saved in the HDD or array.

The HDD disk-checking option is available only for internal HDDs.

5.1.7. Shutting the System Down

Under System, select 7. System Power Off, and then press Enter. The following message

appears prompting you for if you really want to shut down the system.

Upon pressing Enter, the following messages appear while the system shuts down. To move

back to the previous phase, press ESC. To cancel shutting down and move back to the main

screen, hold down ESC for 2 seconds or longer.

These messages also appear when the power switch on the product back panel is flicked, until

the system is completely shut down.

System will be down
in seconds

Preparing Poweroff
is in Progress...

Are you sure?
Yes: Enter No: Esc

RAID PARTITION [1]
Does not exist!

Check HDD to Examine
Please Try Again

Internal HDD [1]
is empty!!

Summary of Contents for SRN-6450



































































































































Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands

Samsung SRN-6450, User Manual

Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands