Samsung SRN-6450 User Manual Download Page 89

Page: 89 / 130

5.3. HDD Mode Setup

On the main screen, press

∧

and

∨

to move to the following screen, and then press Enter.

Sub-menus will appear where you can use

∧

and

∨

to navigate.

Select an HDD operation mode, and then press Enter. The following warning message will

appear. Normal is the non-RAID mode.

After displaying this warning message for 3 seconds, the screen moves to the next screen

corresponding to the selected mode.

Press Enter to change the HDD mode to the selected mode. To move back to the previous

phase, press ESC. To cancel the new settings and move back to the main screen, hold down

ESC for 2 seconds or longer.

While the new RAID mode is being configured, the following messages appear in order,

informing of the progress and remaining time.

Rebooting system
is in Progress...

Preparing RAID1
is in Progress...

Warning! All Record
data will be removed

Use RAID5?
Yes: Enter No: Esc

Use RAID1?
Yes: Enter No: Esc

Unbuild RAID?
Yes: Enter No: Esc

2. RAID1
3. RAID5

1. Normal
2. RAID1

3. HDD Mode Setup
[SET]

Summary of Contents for SRN-6450



































































































































Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands

Samsung SRN-6450, User Manual

Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands