Samsung SRN-6450 User Manual Download Page 25

Page: 25 / 130

Note

You may connect an external HDD while the product is in operation. However,

this may result in certain models of external HDDs not being detected. As
such, it is recommended that you connect any external HDD by following the
steps outlined below.

1. Turn the product off.

2. Connect the external HDD (also turned off) to the product with an eSATA

interface cable.

3. Turn on the external HDD.

4. Turn on the product.

The eSATA cable is not included with the product.

For a list of compatible HDDs, please refer to"

※

Recommended HDDs".

3.1.5. Sensor

The following are specifications and operating conditions for sensor input.

Spec

Number of Input Circuits

Input Types

N.C , N.O

Supported Sensor Types

Dry Contact sensors.

Connection Type

Attach stripped wire connections to the terminal block.

Power

DC 150V

Output Current

Typical DC 12mA

Please refer to the diagram on the next page to connect sensor inputs. It illustrates an example

of a dry contact sensor being connected to the product.

eSATA external HDD

Summary of Contents for SRN-6450



































































































































Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands

Samsung SRN-6450, User Manual

Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands