Samsung SRN-6450 User Manual Download Page 82

Page: 82 / 130

For more information about the default settings value, please refer to "2.3. Default Settings"

Note

The Factory Reset does not reset the RAID settings of the system or delete data

saved in the HDDs.

5.1.6. HDD Check

Under System, select 6. Test HDD, then press Enter. The following messages appear asking

you to select an HDD to check.

Selecting an HDD displays a message asking if you really want to perform disk-checking for

the selected HDD.

When pressing ENTER, the following message appears as the disk-checking process is

initiated. Once the process is complete, the screen displays the check results.

The check results stay on the screen until you click a button.

When selecting an HDD that is not available or connected, the following message appears.

HDD test result:
0 bad block

Are you sure?
Yes: Enter No: Esc

Record on this HDD
will be stopped

Examining Int HDD[1]
[DONE]

Examining Int HDD[1]
is in Progress...

Executing...
Please Wait!!!

HDD to examine
RAID PARTITION? [1]

HDD to examine
Internal HDD? [1]

Rebooting system
is in Progress...

Summary of Contents for SRN-6450



































































































































Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands

Samsung SRN-6450, User Manual

Search results

Summary of Contents for SRN-6450

Reviews:

Related manuals for SRN-6450

Brands by name

Popular brands