13
.2
<Installing accessories>
6
Push the DIMM straight into the DIMM slot until it snaps into place.
Make sure the latches fit over the notches located on either side of
the DIMM.
7
Replace the control board cover.
8
Reconnect the power cord and printer cable, and turn the machine
on.
Activating the added memory in the PS printer
properties
After installing the memory DIMM, you need to select it in the printer
properties of the PostScript printer driver in order to use it.
1
Make sure that the PostScript printer driver is installed on your
computer. For details about installing the PS printer driver, see
Software section
.
2
Click the Windows
Start
menu.
3
For Windows 98/Me/NT 4.0/2000, select
Settings
and then
Printers
.
For Windows XP/2003, select
Printers and Faxes
.
4
Select the
Samsung SCX-6x45 Series PS
printer.
5
Click the right mouse button on the machine icon and select
Properties
.
6
For Windows 98/Me, select
Device Options
.
For Windows NT 4.0/2000/XP/2003, select
Device Settings
.
7
Select the amount of memory you installed from
Printer Memory
in
the
Installable Options
section.
For Windows 98, select
Installable Options
>
VMOption
>
change
setting for:VMOption
>
change memory
.
8
Click
OK
.
Replacing the Stapler
When the stapler is completely empty, the message for installing the
staple cartridge appears on the display screen.
1
Open the finisher cover.
2
Pull the stapler unit out.
Downloaded From ManualsPrinter.com Manuals