Samsung SCX-6x45 Series User Manual Download

Page: 49 / 161

Note

Start Time

is the specific time you want the fax to be sent. You

can set

Start Time

on a 24 hour basis and 15 minutes later than

the current time. For example, if it is 1:00, then you can set the
time starting from 1:15. If the set time is incorrect, the warning
message will appear and the machine resets it to the current
time.

Press

to start storing the scanned original data into memory.

Note

To cancel delaying a fax, press

Off

before sending is activated.

Sending a priority fax

This function is used when a high priority fax need to be sent ahead of
reserved operations. The original is scanned into memory and
immediately transmitted when the current operation is finished. In
addition, priority transmission will interrupt a sending to multiple
destinations between stations (example, when the transmission to station
A ends, before transmission to station B begins) or between redial
attempts.

Press

Fax

from the

Main

screen.

Place the originals face up in the DADF.

Adjust the document settings in the

Image

tab and the

Basic

tab.

Press the

Advanced

tab >

Priority Send

Press

Start

to start the urgent fax job.

Receiving a fax

This section explains how to receive a fax, and the special receiving
methods available.

Changing the receive modes

Your machine is preset to

Fax

mode at the factory. When you receive a

fax, the machine answers the call on a specified number of rings and
automatically receives the fax. But if you want to change the

Fax

mode

to another mode, refer to next steps.

Press

Machine Setup

on the control panel.

Select

Admin Setting

. When the login message pops up, then

enter password and press

. (Page 3.3)

Press the

Setup

tab >

Fax Setup

Fax Initial Setup

Receive

Mode

Select the option.

•

Telephone

: Receives a fax by pressing

On Hook Dial

and then

Start

•

Fax

: Answers an incoming fax call and immediately goes into the

fax reception mode.

•

Answering Machine/Fax

: Is for when an answering machine

attached to your machine. Your machine answers an incoming call,
and the caller can leave a message on the answering machine. If
the fax machine senses a fax tone on the line, the machine
automatically switches to

Fax

mode to receive the fax.

Press

Note

When the memory is full, the machine can no longer receive any
incoming fax. Secure free memory to resume by removing data
stored in the memory.

Receiving manually in Telephone mode

You can receive a fax call by pressing

On Hook Dial

and then pressing

Start

when you hear a fax tone from the remote machine. The machine

begins receiving a fax.

Receiving automatically in Answering Machine/
Fax mode

To use this mode, you must attache an answering machine to the EXT
socket on the back of your machine. (Page 1.3)
If the caller leaves a message, the answering machine stores the
message as it would normally. If your machine detects a fax tone on the
line, it automatically starts to receive the fax.

Receiving faxes manually using an extension
telephone

This feature works best when you are using an extension telephone
connected to the EXT socket on the back of your machine. You can
receive a fax from someone you are talking to on the extension
telephone, without going to the fax machine.

When you receive a call on the extension phone and hear fax tones,
press the keys

on the extension phone. The machine receives the

fax.

Note

• If you have set your machine to this mode and your answering

machine is switched off, or no answering machine is connected
to EXT socket, your machine automatically goes into Fax mode

after a predefined number of rings.

• If your answering machine has a user-selectable ring counter,

set the machine to answer incoming calls within 1 ring.

• If you are in Telephone mode when the answering machine is

connected to your machine, you must switch off the answering

machine, or the outgoing message from the answering