Samsung OfficeServ 7000 Series, Programming Manual

Page: 98 / 487

CHAPTER 2. MMC Programming
2-60 © SAMSUNG Electronics Co., Ltd.
[210] CUSTOMER ON/OFF PER TENANT
Allows the system administrator to set system features on a per-tenant basis. Each system
option has a corresponding dialing number, as listed below. All options toggle ON/OFF.
No Option Default Description
00 DISA PSWD OFF When ON, a caller must enter extension number and DISA
password when they call a DISA trunk. When OFF, extension
number and DISA passwords are not required and the caller
has full access to all features allowed on this trunk.
01 LCR ENABLE OFF This option determines whether the system will or will not
route outgoing calls based on the information in the LCR
routing tables
03 PERI UCD RPT OFF Periodic UCD Information provider. Enables UCD Statistics
data on a per-UCD group basis to print out on the IO port
which has been set as PERI UCD in real time (every 3~99
seconds). This allows the information to be interfaced and
manipulated by an external package or third party provided
software.
04 CID CODE INS OFF When ON, the system will insert the country code when
receiving CID information. This feature can use the CID
display callback feature.
05 DISA MOH OFF When ON, outside parties will hear trunk MOH instead of dial
tone from the time the system answers a DISA trunk until the
caller dials a digit.
06 TRANSFER
MOH
OFF When ON, outside parties will hear trunk MOH instead of
ringback tone from the time a transfer is completed until the
call is answered by an internal party.
08 DID BSY ROUT OFF When ON, a DID call directed to a busy station will re-route
to the destination in MMC 406 for that trunk, if CW is set to
OFF in MMC 714. If the CW option is set to ON the call will
camp on. When OFF and the CW option is set to OFF, the
call will re-route to the operator.
09 ALARM MOH ON When ON, a station user answering an alarm ring will hear
station MOH instead of dial tone.
10 ALL PICK UP OFF When ON, call can be picked up regardless of the pickup
group by using MYGRPK feature code.
13 RECALL PIKUP OFF When ON, a call recalling to a station can be picked up using
Direct Call Pickup, Pickup Group and My Group features.
This applies to held calls recalling and transferred calls
recalling to a station.