Samsung OfficeServ 7000 Series Programming Manual Download Page 60

Page: 60 / 487

CHAPTER 2. MMC Programming

2-22

(Continued)

Feature

Default

Description

AUTO ANS CO

OFF

When ON, keyset will automatically answer outside calls

through the speakerphone. For this to work, the keyset

must be set to Auto Answer mode in MMC 103. Calls to

groups cannot be auto-answered.

ENBLOCK 2LCD

OFF

Enables en-block dialing for 2-Line LCD phones.

This option only works when 2 LINE ENBLOCK option is

enabled in MMC 861.

STN NO RING

OFF

When ON, no tones will be heard when phone rings.

FEATURE TONE

OFF

When the extension is set as ‘ON’ and a subscriber sets the

extension function, a tone (message tone) different from

dial tone will be heard. The relevant functions are DND, All

Forward, Busy Forward, No Answer Forward, Follow Me

and Station Lock functions.

RCV GPU INFO

OFF

When ON, the extensions will receive the information of

PING RING. This function can operate in case PING RING

SERVICE is enabled in MMC861.

MISSED CALL

OFF

When ON, the information of the missed calls will be

displayed on extensions. The missed call means that the

ringing call is not answered. The information of the missed

calls includes the below

- The call which was not answered.

- In case the call which was occurred by group call was

not answered.

- In case the call by group call was overflowed to the other

extension.

- The call which was forwarded because of setting NO

ANSWER FORWARD

- The call which was picked up by other extensions

In case of Call Waiting, it is not included.

NO DISP TRK#

OFF

This feature selects whether the trunk number is displayed

or not for the duration of the call. When ON, incoming or

outgoing number without trunk number will be displayed.

If there is no incoming/outgoing number to be displayed,

only trunk number will be shown.

USE STN RING

OFF

When ON, the IP phone will be use self ring melody,

otherwise the IP phone will be use system ring melody.

DEFAULT DATA

SEE DESCRIPTION

SOME OPTIONS DEPEND ON COUNTRY

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands