Samsung OfficeServ 7000 Series Programming Manual Download Page 19

Page: 19 / 487

OfficeServ 7000 Series Call Server Programming Manual

1-1

CHAPTER 1.

Overview of MMC

Programming

In this chapter, the things to know before you start MMC programming, and the phone

buttons and cautions will be discussed.

1.1 Introduction to Programming

The MMC means the changes on the data that is used for the system operation program.

The MMC can be divided into programmable one and non-programmable one.

The programmable MMC is classified into 3 levels, such as technician, operator, and

station level. The technician level programming and the operator level programming

require a passcode for each level and the station level programming does not require a

passcode.

Program List by User’s Level

For more information about the programming level, refer to ‘1.4 Program List by

User’s Level’ of this chapter.

Summary of Contents for OfficeServ 7000 Series








































































































































































































































































































































































































































































































Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands

Samsung OfficeServ 7000 Series, Programming Manual

Search results

Summary of Contents for OfficeServ 7000 Series

Reviews:

Related manuals for OfficeServ 7000 Series

Brands by name

Popular brands